Pallet of split oak cooking wood stacked for delivery in North Texas

Firewood & Smoking Wood Calculator

How many pallets of oak, pecan or mesquite do you need for your smoker, fireplace, fire pit or pizza oven?

How much firewood or cooking wood do you need? Answer four quick questions and get an estimate in pallets and cords, a suggested wood, and a recurring plan with the 10% subscription discount. One pallet is 64 cubic feet, half of a full cord.

1. What's the wood for?

2. Your cooker or fireplace

Bigger fireboxes burn more wood per hour.

3. How often and how long?

Tip: 0.5 per week = every other week. A North Texas fireplace season is often about 3–5 months.

4. What do you cook most?

Your estimateSee plan ↓

How the estimate works

Wood needed = burn rate (lb per hour) × hours per session × sessions per week × weeks in your season, plus a 10% buffer, then divided by the weight of one pallet.

  • Pallet size (published): one Pitmaster pallet is 64 cubic feet = ½ cord. Two pallets = one full cord (128 cu ft, 4×4×8 ft).
  • Pallet weight (assumption): about 1,750 lb, based on roughly 3,500 lb per stacked cord of seasoned oak. Pecan and mesquite are similar or a little heavier.
  • Buffer (assumption): +10% for lighting fires, wind, cold days and a little left over.
  • Burn rates (assumptions): rounded rules of thumb for seasoned hardwood under 20% moisture, shown in the table. Green or wet wood burns faster and smokier.
  • Plan: about 3.5+ pallets a month suggests weekly deliveries, 1.6+ every other week, 0.75+ monthly; less than that is usually one delivery for the season. Recurring plans are 10% off ($315 instead of $350 per pallet).
UseSizeBurn rate
Smoking & BBQKettle, kamado or pellet/charcoal smoker (wood chunks)1 lb/hr
Smoking & BBQBackyard offset (up to ~120 gal)5 lb/hr
Smoking & BBQLarge offset or ~250 gal trailer pit9 lb/hr
Smoking & BBQ~500 gal pit (catering, food truck)16 lb/hr
Smoking & BBQ1,000 gal+ restaurant pit28 lb/hr
Fireplace or wood stoveWood stove or fireplace insert4 lb/hr
Fireplace or wood stoveStandard open fireplace7 lb/hr
Fireplace or wood stoveLarge or outdoor fireplace10 lb/hr
Fire pitSmall pit or chiminea (under 36 in)6 lb/hr
Fire pitMedium pit (36–48 in)9 lb/hr
Fire pitLarge pit or fire ring (48 in+)13 lb/hr
Pizza ovenBackyard wood-fired oven5 lb/hr
Pizza ovenCommercial pizza oven12 lb/hr
Running a restaurant, food truck or caterer? We can use your actual burn rate to set your delivery schedule and keep your resale tax-exemption certificate on file. Call or text 682-500-1840.

Wood calculator FAQ

How much firewood is in a pallet?

One Pitmaster pallet is 64 cubic feet of split hardwood, half of a full cord (a full cord is 4×4×8 feet, 128 cubic feet). Splits are 15–17 inches long.

How much wood does a smoker use?

Roughly 1 lb an hour for wood chunks on a kettle or kamado, about 5 lb an hour for a backyard offset, about 9 lb for a large offset or 250-gallon pit, and 16–28 lb an hour for 500- to 1,000-gallon restaurant pits. Weather, wood size and how tight the pit is all change this.

How much firewood do I need for a winter?

Burning a standard open fireplace about 3 nights a week for 4 hours over a 4-month North Texas winter uses roughly 1 pallet (half a cord) with a 10% buffer. Use the calculator above for your own numbers.

How much does a subscription save?

Recurring deliveries (weekly, every other week or monthly) are 10% off: $315 per pallet instead of $350, with free delivery and stacking.

Is the calculator exact?

No. It's a planning estimate based on the burn rates listed on this page. Pitmaster Wood Supply can also work from your actual burn rate to set a delivery schedule. Call or text 682-500-1840.